|
|
POWER AMP
PRISM
STUDIO PRO SA-80.4
|
| Channels |
4/3/2 channel |
| RMS Power (4 ohm) |
4 x 80 watt |
| RMS Power (2 ohm) |
4 x 180 watt |
| RMS Power bridged (4 ohm) |
2 x 180 watt |
| Frequency Response 1 dB |
20Hz ~ 20 kHz |
| Signal to Noise Ratio |
>92 dB |
| Separation @ 1 Khz |
>60 dB |
| THD |
<0.05% |
| Input Sensitity |
150 mv-1.5 v |
| Input Impedance |
33 kohm |
| Low Pass Filter |
50-500Hz/12 dB |
| High Pass Filter |
50-500Hz/12dB |
| Cool Fan |
60 x 60 x 10 mm |
| Idle Current |
1A |
| Fuse Rating |
ATC 40A |
| Dimensions |
12" L x 7" W x 2.36"H |
|
| |
|
POWER AMP
PRISM
STUDIO PRO SA-150.2
|
| Channels |
2/1 channel |
| RMS Power (4 ohm) |
2 x 150 watt |
| RMS Power (2 ohm) |
2 x 206 watt |
| RMS Power bridged (4 ohm) |
1 x 420 watt |
| Frequency Response 1 dB |
20Hz ~ 20 kHz |
| Signal to Noise Ratio |
>90 dB |
| Separation @ 1 Khz |
>63 dB |
| THD |
<0.05% |
| Input Sensitity |
150 mv-1.5 v |
| Input Impedance |
33 kohm |
| Low Pass Filter |
50-500Hz/12 dB |
| High Pass Filter |
50-500Hz/12dB |
| Cool Fan |
60 x 60 x 10 mm |
| Idle Current |
0.8 A |
| Fuse Rating |
ATC 25 A x 2 |
| Dimensions |
12" L x 7" W x 2.36"H |
|
| |
|
POWER AMP
PRISM
STUDIO PRO SA-1500.1D
|
| RMS Power, into 4 ohms |
600 watt x 1 |
| MAX Power, into 2 ohms |
900 watt x 1 |
| MAXPower, into 1 ohms |
1500 watt x 1 |
| THD at Watt, 4 ohms |
0.30% |
| THD at Rated Power |
0.50% |
| Signal to Noise Ratio, below rated power output |
100dB |
| Frequency Response, at 1 Watt, 4 Ohm |
15Hz to 150 kHz (+/-3dB) |
| Frequency Response, at rated power, 4 Ohm |
20Hz to 250Hz (+/-3dB) |
| Damping Factor at 20Hz, 4 Ohm |
400 |
| Crossover : Low Pass |
50Hz - 150Hz, 24dB/Octave |
| Crossover : Subsonic (High Pass) |
15Hz - 40Hz, 24dB/Octave |
| Bass Boost |
0+18dB |
| Phase Control |
0 to 180° |
| Input Sensitity |
100mV to 2V/2V to 8V |
| Input Impedance |
10K - Ohm |
| Line Output impedance |
100 Ohm |
| Peak Current consumption, at rated power into
1 Ohm |
120 Amperes |
| Dimensions |
19"Lx7"W x 2.36"H |
| Fuse Rating |
ATC 30 A x 2 |
|
| |
|
POWER AMP
PRISM
STUDIO PRO SA 74.5
|
| Total Power (14.4V@ 1 KHz) |
4-CH |
| Channels |
4/3/2 channel |
| RMS Power (4 ohm) |
4 x 70 watt |
| RMS Power (2 ohm) |
4 x 98 watt |
| RMS Power bridged (4 ohm) |
2 x 190 watt |
| Frequency Response 1 dB |
20Hz ~ 20 kHz |
| Signal to Noise Ratio |
>92 dB |
| Separation @ 1 Khz |
>60 dB |
| THD |
<0.05% |
| Input Sensitity |
150 mv-1.5 v |
| Input Impedance |
33 kohm |
| Low Pass Filter |
50-500Hz/12 dB |
| High Pass Filter |
50-500Hz/12dB |
| Cool Fan |
60 x 60 x 10 mm |
| Idle Current |
1A |
| Fuse Rating |
ATC 40A |
| Dimensions |
12" L x 7" W x 2.36"H |
|
| |
|
POWER AMP
PRISM
STUDIO PRO SA 100.2
|
| Total Power (14.4V@ 1 KHz) |
2-CH |
| Channels |
2/1 channel |
| RMS Power (4 ohm) |
2 x 150 watt |
| RMS Power (2 ohm) |
2 x 206watt |
| RMS Power bridged (4 ohm) |
1 x 420 watt |
| Frequency Response 1 dB |
20Hz ~ 20 kHz |
| Signal to Noise Ratio |
>92 dB |
| Separation @ 1 Khz |
>63 dB |
| THD |
<0.05% |
| Input Sensitity |
150 mv-1.5 v |
| Input Impedance |
33 kohm |
| Low Pass Filter |
50-500Hz/12 dB |
| High Pass Filter |
50-500Hz/12dB |
| Cool Fan |
60 x 60 x 10 mm |
| Idle Current |
0.8 A |
| Fuse Rating |
ATC 25A x 2 |
| Dimensions |
12" L x 7" W x 2.36"H |
|
| |
|
POWER AMP
PRISM
EXCLUSIVE LINE EX- 1000.2
|
Dynamic
(4 ohm mono) 1050 watts,.
- S/N ratio >105 dB,
- Transient distortion (4 ohm, 100 w) <0.005%@4 ohm,
- Bass boost 0-18 dB @45 Hz,
- Crossover (Butterworth) 12/24 dB
- Stereo 50 Hz-5.5 kHz,
- Max. Current Requirements 1100 watt
|
| |
|
POWER AMP
PRISM
EXCLUSIVE LINE EX - 200.2
|
2/1
Channel mosfet amplifier built in high low-pass/bass
boost.
- RMS Power (4 ohm) 12v @ 1kHz
- T.H.D 0.003% 2 x 100 watt.
-
RMS Power (2 ohm) 2 x 350 watt
- Low pass filter 50-550 Hz/12 dB
- High pass filter 50-550 Hz/12 dB
- Bass
|
| |
|
|
© copyright Audio Network. All rights Reserved
2002
Audio Network Co., Ltd.
330 Soi Chaleamsuk, Ratchada Road, Radyao, Jatujak, Bangkok 10900
Tel. (66) 2930-0888-9
FAX. (66) 2939-0978
E-mail : info@prismcaraudio.com
|
